HP Anti Rust provides anti corrosion protection to new metal products and stops the spread of already started metal deterioration of old cars, boats, gardening equipmnet and others, by transforming rust into protective superficial layer.
THE RESULT OF THE TREATMENT IS A RENEWED, CORROSION FREE AND REINFORCED METAL
The product is easy to use and it is not harmful for humans,animals and the environment. It is important to follow the directions for use.
The application can be done with brush, roller, spray or immersing procedure: usually 1-2 coats that should be applied at intervals of 40-60 minutes, at the temperature above +5ºС (with humidity under 75%).
Consumption: not lower than 100-130 g/m2.
Avoid the product absorption into the surface, it can change the color of the surface. If the product gets to the colored surface, wash immediately with plenty of water.
The surface to be treated must be dry, free from dust, bark, drying oil, paint varnish or other film- forming or water-repellent materialsand varnishes, and from other contaminants.
Do not mix HP Anti Rust with other products!
It is possible to paint or over-coat with decorative materials once the substrate has dried sufficiently. The approximate drying time is 24-48 hours.
Climate conditions like low temperatures and/or high relative humidity can lengthen the drying time.
Please, feel free to contact us for any assistance and more information about HP Anti Rust metal protection and rust converter solution